Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set - Manual (Page 123)

Editing Programs On Line
Chapter 5
5-3
3. Select the part program you want to edit by using one of these two
methods:
Key in the program name of the part program to edit or create
or
Move the cursor to the program name on the program directory
screen by using the up and down cursor keys
Important: If you are creating a new program and using it as a
subprogram, see page 10-8 on program names. Programs used as
subprograms must have the letter O as the first character in the
program name, followed by up to 5 numeric characters.
4. Press the {EDIT PRGRAM} softkey.
REFORM
MEMORY
CHANGE
DIR
ACTIVE
PRGRAM
EDIT
PRGRAM
RESTRT
PRGRAM
DISPLY
PRGRAM
COPY
PRGRAM
VERIFY
PRGRAM
PRGRAM
COMENT
DELETE
PRGRAM
RENAME
PRGRAM
INPUT
DEVICE
(softkey level 2)
This section provides information on how to edit part programs after a
program has already been selected to edit as described on page 5-1.
This section contains the following subsections:
Topic: On Page:
Moving the Cursor {STRING SEARCH} 5-5
Entering Characters and Blocks 5-7
Changing and Inserting {MODIFY INSERT} 5-7
Erasing Characters and Blocks 5-10
Sequence Numbers {RENUM PRGRAM} 5-13
Merging Part Programs {MERGE PRGRAM} 5-15
Exiting Edit Mode 5-15
5.2
Editing Programs at the
Control (on line)