Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set - Manual (Page 45)

Chapter 2
Operating the Control
2-25
{ACCESS CONTRL} function. Enter a password that has access to
{ACCESS CONTRL} .
2. Press the {ACCESS CONTRL} softkey. This displays the access control
screen (Figure 2.5).
(softkey level 2)
ACCESS
CONTRL
Figure 2.5
Access Control Screen
UPDATE
& EXIT
01 02 03 04
PASSWORD NAME -- (current password)
1 ACTIVE PROGRAM 18 ACCESS CONTROL
2 PROGRAM MANAGE 19 SWITCH LANGUAGE
3 EDIT PROGRAM 20 POWER UP LEVEL
4 COPY PROGRAM 21 TIME PARTS
5 RENAME PROGRAM 22 SI/OEM MESSAGE
6 DELETE PROGRAM 23 SCALING
7 REFORMAT MEMORY 24 CHANGE DIRECTORY
8 OFFSETS 25 AUX COMM
9 TOOL WEAR 26 SEARCH MONITOR
10 TOOL GEOMETRY 27
11 ACTIVE OFFSET 28
12 BACKUP OFFSET 29
13 QUICK CHECK 30
14 SYSTEM SUPPORT 31
15 PRGRAM PARAMET 32
16 AMP 33
17 PARAMACRO PROG 34
The softkey names change to display the 8 access levels and their
corresponding passwords (provided that a password has been
assigned to that access level). Only the password names of access
levels that are lower than the currently active access level appear.