Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set - Manual (Page 186)

Editing Part Programs Off Line
Chapter 6
6-16
9. Type in the new name for the existing part program file on the
workstation.
If you select this option: then:
overwrite the part program file being uploaded overwrites the file
having the same name on the workstation.
abort the upload process is discontinued and the workstation
prompts the programmer for additional files to upload.
Important: If you enter a wildcard in place of a file name, the Abort
option is repeated for each file that matches the wildcard. Pressing
the
[ESC]
key quits the abort wildcard process.
If the name of the part program that was entered does not exist on the
workstation or the Overwrite option was selected, the workstation
displays this screen:
F1 - File F2 - Project F3 - Application F4 - Utility F5 - Configuration
Proj: Demo Appl: Upload Util: Get Part Program
Upload In Progress
Percent Transferred: 80%
The percentage of the upload process that has currently been
completed is displayed on the screen. This value is updated
continually throughout the upload process.