Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set User Manual
Page 33
Advertising
Chapter 2
Operating the Control
2-13
JOG
AXIS
PRGRAM
EXEC
SOFTWARE FRONT PANEL
MODE SELECT:
MDI
RAPID TRAVERSE:
OFF
FEEDRATE OVR:
0%
RAPID FEEDRATE OVR:
0%
SPINDLE DIRECTION:
OFF
SPINDLE SPEED OVR:
50%
DRY RUN MODE:
OFF
BLOCK DELETE:
OFF
M-FUNC LOCK:
OFF
OPTIONAL STOP:
OFF
SINGLE BLOCK:
OFF
MIRROR IMAGE:
X
AXIS INHIBIT:
XZ
USE CURSOR FOR SELECTION
2.
Press the up and down cursor keys to select the feature to change.
The value of the selected feature appears in reverse video.
3.
Press the left and right cursor keys to alter the value of the selected
feature.
When you select the mirror image and axis inhibit features, the softkey
names change to the axis names. Press the softkey that corresponds to
the axis (or axes) to which you want to assign these features.
Advertising