Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set - Manual (Page 137)

Editing Programs On Line
Chapter 5
5-17
The QuickView feature aids the programmer by giving access to:
QuickPath Plus Prompts -- a selection of commonly used sample
patterns representing a series of machining steps with prompts for the
necessary words to program it using QuickPath Plus. See page 12-11
for details on QuickPath Plus
G-code Prompting -- a selection of the more commonly used G codes
with prompts for the necessary words to program it
Grinder Prompting -- a selection of the more commonly used grinder
cycles with prompts for the necessary words to program it
Plane Select -- a selection of the planes in which the different
QuickView features are programmed
Important: Before accessing a QuickView screen any active graphics or
Quick Check graphics features must be disabled. If you attempt to access a
QuickView screen without first deactivating both graphics features, the
control issues the message MUST DISABLE RUN-TIME GRAPHICS.
The
{DISABL GRAPHS} softkey becomes available, letting the operator
disable graphics from the current location in the softkey tree.
Use these steps to select the QuickView features:
1. Select a program for editing as covered on page 5-1.
2. From the edit menu, press the {QuickView} softkey.
DIGITZ
E
MODIFY
INSERT
BLOCK
DELETE
BLOCK
TRUNC
DELETE
CH/WRD
EXIT
EDITOR
STRING
SEARCH
RENUM
PRGRAM
MERGE
PRGRAM
QUICK
VIEW
CHAR/
WORD
(softkey level 3)
The softkey functions change to those indicated below:
QPATH+
PROMPT
G CODE
PROMPT
GRINDR
PROMPT
PLANE
SELECT
(softkey level 4)