Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set - Manual (Page 668)

Paramacros
Chapter 20
20-24
#5021 to 5032
Coordinates of Commanded Position
These parameters are read-only. They correspond to the current
coordinates of the cutting tool. These are the coordinates in the work
coordinate system.
5021 Axis 1 coordinate position 5027 Axis 7 coordinate position
5022 Axis 2 coordinate position 5028 Axis 8 coordinate position
5023 Axis 3 coordinate position 5029 Axis 9 coordinate position
5024 Axis 4 coordinate position 5030 Axis 10 coordinate position
5025 Axis 5 coordinate position 5031 Axis 11 coordinate position
5026 Axis 6 coordinate position 5032 Axis 12 coordinate position
The system installer determines in AMP the name (or word) that is used to
define the axis.
#5041 to 5052
Machine Coordinate Position
These parameters are read-only. They correspond to the coordinates of the
cutting tool in the machine (absolute) coordinate system.
5041 Axis 1 coordinate position 5047 Axis 7 coordinate position
5042 Axis 2 coordinate position 5048 Axis 8 coordinate position
5043 Axis 3 coordinate position 5049 Axis 9 coordinate position
5044 Axis 4 coordinate position 5050 Axis 10 coordinate position
5045 Axis 5 coordinate position 5051 Axis 11 coordinate position
5046 Axis 6 coordinate position 5052 Axis 12 coordinate position
The system installer determines in AMP the name (or word) that is used to
define the axis.