Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set - Manual (Page 67)

Chapter 2
Operating the Control
2-47
Changing Date
To change the date setting:
1. Press the {SET DATE} softkey, provided that you have
supervisor-level access.
You are prompted for a new date with a line that displays the current
date setting.
2. Press the [DEL] key to erase the characters displayed.
3. Type in the new date.
You must enter the new date using one of these formats:
Month/Day/Year is the English format
Year/Month/Day is the Japanese format
Day/Month/Year is the Italian and German format
Changing Time
To change the time setting:
1. Press the {SET TIME} softkey.
You are prompted for a new time with a line that displays the current
time setting.
2. Change the current setting by pressing the [DEL] key to erase
characters, and the left or right arrow keys to position the cursor.
Then type in the new time. The control’s clock rolls over every 24
hours.
You must enter the new time using the format
hours:minutes:seconds.
For example:
2:16 pm should be entered as 14:16:00.