Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set - Manual (Page 270)

Communications
Chapter 9
9-10
SELECTED PROGRAM:
DIRECTORY PAGE 1 OF 1
NAME SIZE COMMENT
O12345 1.3 SUB TEST 1
TEST 3.9 NEW
MAIN 1.3
TTTE 1.3 THIS IS A TEST PROGRAM
XXX 1.3
5 FILES 120.7 METERS FREE
ACTIVE
PRGRAM
EDIT
PRGRAM
RESTRT
PRGRAM
DISPLY
PRGRAM
COPY
PRGRAM
3. Select the directory into which you want the program to be copied.
You can select the main directory or the protectable directory. The
control displays the main directory as the default directory at
power-up. The protectable directory must be selected using the
{CHANGE DIR} softkey.
The {CHANGE DIR} softkey controls access to the protectable part
program directory. This softkey is password protected. You must
have the proper password to be able to access this softkey. See page
5-42 for additional information on the protectable directory and the
{CHANGE DIR} softkey.
4. Press the {COPY PRGRAM} softkey.
REFORM
MEMORY
CHANGE
DIR
ACTIVE
PRGRAM
EDIT
PRGRAM
RESTRT
PRGRAM
DISPLY
PRGRAM
COPY
PRGRAM
VERIFY
PRGRAM
PRGRAM
COMENT
DELETE
PRGRAM
RENAME
PRGRAM
INPUT
DEVICE
(softkey level 2)