Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set - Manual (Page 55)

Chapter 2
Operating the Control
2-35
(3) Automatic mode
To operate the machine automatically,
select AUTO under <MODE SELECT>
or
press the {FRONT PANEL} softkey
Use left/right arrow keys to select mode options if using {FRONT PANEL} .
Details about using the {FRONT PANEL} softkey are given on page 2-11.
For details on automatic operation, see chapter 7.
Figure 2.8
Automatic Operation Screen
PRGRAM
MANAGE
OFFSET MACRO
PARAM
PRGRAM
CHECK
SYSTEM
SUPORT
E-STOP
PROGRAM [ MM ] F 0 MMPM
R X 00000.000 S 0
Z 00000.000 T 1
MEMORY AUTO STOP N 99999
(First 4 blocks of
program shown here)
(PAL messages)