Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set - Manual (Page 264)

Communications
Chapter 9
9-4
DEVICE (setting type of peripheral)
Select your peripheral device immediately after selecting your serial port.
The devices with default communication parameters stored in the control
are listed in Table 9.A. If the device that you are using is not listed, select
USER PUNCH, USER PRINTER, or USER READER.
Table 9.A
Available Devices for Communication with the 9/SERIES Control
Device Device Type
Allen-Bradley 1770-SB Cartridge
Ricoh PTR240R
Facit N4000 Reader
Decitek AB 8000-XPDR
DSI SP75
Facit 4070 Punch
Facit N4000
Epson LX-810 (USA) Printer
Epson SP-500 (JAPAN)
User Punch
User Reader User Defined
User Printer
Teach Pendant
PAL-RS232 Comm
ODS ODS Terminal
Generic Level_2 Computer using only level 2 protocol
Greco Minifile Intelligent Storage
Intelligent Device Personal Computer using
Communication Software
For a more detailed list of the available peripheral devices and their
function, see the integration/maintenance manual.
PORT TYPE
Port type options differ depending on the port you select.
Port Type
Port A RS232
Port B RS232 or RS422
Port A is not available on 9/230 grinders.