Key. you see the main menu screen – Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set User Manual
Page 39
Advertising
![background image](/manuals/580089/39/background.png)
Chapter 2
Operating the Control
2-19
After power has been turned on, the control displays the power turn-on
screen. To activate the main menu, press the
[TRANSMIT]
key.
You see the main menu screen:
PROGRAM
[ MM
]
F
00000.000 MMPM
R X
00000.000
S
Z
00000.000
T
12345
FILENAME
SUB NAME 9999
MEMORY
MDI
STOP
(PAL messages)
PRGRAM
MANAGE
OFFSET MACRO
PARAM
PRGRAM
CHECK
SYSTEM
SUPORT
E-STOP
The softkeys available on the main menu screen are referred to as “level 1”
softkey functions. Some of the softkey functions are purchased as optional
and may not appear exactly as shown.
Advertising