Target – Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set User Manual
Page 229
Advertising
Displays and Graphics
Chapter 8
8-9
{TARGET}
The coordinate values of the end point of the currently executing axis
move is displayed at a position in the current work coordinate system.
Figure 8.7
Results After Pressing {TARGET} Softkey
TARGET[ MM
]
F
0.000 MMPM
X -7483.647
S
00
Z -7483.647
T 0
U -7483.647
(ACTIVE PROGRAM NAME)
MEMORY
MAN
STOP
PRGRAM A B S
TARGET
D T G AXIS
SELECT
E-STOP
Advertising