Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set User Manual
Page 51
Advertising
Chapter 2
Operating the Control
2-31
To enter a password, follow these steps:
1.
Press the
{PASSWORD}
softkey.
(softkey level 1)
FRONT
PANEL
ERROR
MESAGE
PASS-
WORD
SWITCH
LANG
You see the password log-on screen:
ACCESS
CONTRL
ENTER PASSWORD:
PROGRAM
[INCH]
F
0.000 MMPM
Z
00000.000
S
0
R X
00000.000
T
1
C
359.99
MEMORY
MAN
STOP
E-STOP
The prompt “ENTER PASSWORD:” appears on line 2 of the CRT.
2.
Enter the password. The control displays only * for the characters
entered. If you make an error entering the password, edit the input
line as described on page 2-41.
3.
When the password is correct, press the
[TRANSMIT]
key. The access
level that the password is assigned to is made active, and the control
enables all of the functions that are assigned to that access level.
Advertising