Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set User Manual

Page 163

Advertising

Editing Programs On Line

Chapter 5

5-43

If you have access to the

{CHANGE DIR}

softkey, you can:

perform any of the program edit functions on the protected programs
directly select and activate any of the protected programs
view programs executing from this directory

You can only call a protected program from a main program using a
subprogram, G code macro, or M code macro call without access to the

{CHANGE DIR}

softkey.

If you do not have access to the

{CHANGE DIR}

softkey, you cannot view the

executing blocks of the program called from the protected directory.

To access the protectable part program directory:

Press the

{PRGRAM MANAGE}

softkey.

(softkey level 1)

PRGRAM

MANAGE

OFFSET MACRO

PARAM

PRGRAM

CHECK

SYSTEM

SUPORT

FRONT

PANEL

ERROR

MESAGE

PASS-

WORD

SWITCH

LANG

The control displays the main program directory screen:

ACTIVE

PRGRAM

EDIT

PRGRAM

RESTRT

PRGRAM

DISPLY

PRGRAM

COPY

PRGRAM

SELECTED PROGRAM:

MAIN