Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set - Manual (Page 305)

Introduction to Programming
Chapter 10
10-27
Surface
Grinder Modal or
Non-modal
Function Group
Number
Cylindrical
Grinder
G59.3 G59.3 12 Preset Work Coordinate System 9 Modal
G61 G61 13 Exact stop mode
G62 G62 Automatic corner override mode
G64 G64 Cutting mode
G65 G65 00 Paramacro Call Non-modal
G66 G66 14 Modal paramacro call Modal
G66.1 G66.1 Modal paramacro call
G67 G67 Modal paramacro call cancel
G68 G68 16 Part rotation
G69 G69 Part rotation cancel
G70 G70 06 Inch input
G71 G71 Metric input
G80 G80 09 Canned cancel
G81 G81 Reciprocation on
G81.1 G81.1 Reciprocation with predress on
G82 -- -- Plunge grind cycle, axis 1
-- -- G82 Incremental face grind cycle, axis 1
G82.1 Plunge grind with predress, axis 1
-- -- G82.1 Incremental face grind with predress, axis 1
G83 -- -- Incremental plane grind, axis 1 plunge
-- -- G83 Incremental plunge grind, axis 2 plunge
G83.1 -- -- Incremental plane grind, axis 1 plunge with predress
-- -- G83.1 Incremental plunge grind, axis 2 plunge with predress
G84 -- -- Incremental plane grind, axis 2 plunge
-- -- G84 Multi-pass face cycle
G84.1 Incremental plane grind, axis 2 plunge with predress
-- -- G84.1 Multi-pass face cycle with predress
G85 -- -- Continuous plane grind, axis 1 plunge
-- -- G85 Multi-pass diameter plunge
G85.1 -- -- Continuous plane grind, axis 1 plunge with predress
-- -- G85.1 Multi-pass diameter plunge with predress
G86 -- -- Continuous plane grind, axis 2 plunge
-- -- G86 Shoulder grind cycle
G86.1 Continuous plane grind, axis 2 plunge with predress
-- -- G86.1 Shoulder grinder cycle with predress
-- -- G87 Face plunge shoulder cycle
-- -- G87.1 Face plunge shoulder cycle with predress
-- -- G88 Diameter plunge shoulder cycle Modal