Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set - Manual (Page 174)

Editing Part Programs Off Line
Chapter 6
6-4
The workstation displays this screen:
F1 - File F2 - Project F3 - Application F4 - Utility F5 - Configuration
Proj: Demo Appl: Part Program Util: File Management
FILE1 FILE2 FILE3
Editing Part Program ...
Selecting New or Existing File
Use ARROWS or Type in name. Press ENTER when done or ESC to cancel
4. Select a new or existing file. To create a new file, type in the new file
name. To open an existing file use the arrow keys to select a file or
type in a file name. Press [
ENTER ] when done, or [ESC] to cancel.
After selecting a file, the workstation displays a screen explaining the
text editor:
F1 - File F2 - Project F3 - Application F4 - Utility F5 - Configuration
Proj: Demo Appl: Part Program Util: File Management
The configured text editor will now be executed,
using the file name selected.
Press any key to continue...