Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set - Manual (Page 48)

Chapter 2
Operating the Control
2-28
Table 2.C
Password Protectable Functions
Parameter Name Function becomes accessible when parameter name appears in reverse video:
1) ACTIVE PROGRAM To access these features, both ACTIVE PROGRAM and PROGRAM MANAGE (number 2 below) must be
assigned to the user.
• {SELECT PRGRAM} — Select a program for automatic operation.
• {SEARCH} — Search a part program for a character string or sequence number to begin program
execution at.
• {MID ST PRGRAM} — Start program execution from some location other than the beginning and
still set all of the parameters previously defined in the program active.
• {T PATH GRAPH} — Enable the active graphics feature.
• {CANCEL PRGRAM} — Disable the currently active program from execution.
• {SEQ STOP} — Choose a sequence number for automatic program execution to stop at.
2) PROGRAM MANAGE • {ACTIVE PRGRAM} — All of the functions in 1 above provided ACTIVE PROGRAM (number 1
above) is also selected.
• {EDIT PRGRAM} — Edit an existing program or create a new program.
• {DISPLY PRGRAM} — Display a program using the display function.
• {COPY PRGRAM} — Copy a program to or from memory.
• {VERIFY PRGRAM} — Verify that two programs are identical using the verify function.
• {COMENT} — Add comments to a program name in the directory.
• {RENAME PRGRAM} — Change a program name.
• {DELETE PRGRAM} — Delete a single program stored in memory.
• {REFORM MEMORY} — Delete all programs currently stored in memory.
3) EDIT PROGRAM {EDIT PRGRAM} — Edit an existing program or create a new program.
4) COPY PROGRAM {COPY PRGRAM} — Copy a program to or from memory or storage device.
5) RENAME PROGRAM {RENAME PRGRAM} — Rename a program name.
6) DELETE PROGRAM {DELETE PRGRAM} — Delete a single program stored in memory.
7) REFORM MEMORY {REFORM MEMORY} — Delete all programs currently stored in memory and format RAM.
8) OFFSETS • {WORK CO-ORD} — Display and alter the preset work coordinate system zero locations and the fixture
offset value.
• {WHEEL GEOMET} — Display and alter the wheel geometry tables.
• {RADIUS TABLE} — Display and alter the dresser/wheel radius and orientations.
• {ACTIVE OFFSET} — Change the currently active offset number without requiring the programming of a
different offset number.
• {COORD ROTATE} — Rotate all of the work coordinate systems from the machine coordinate system.
• {BACKUP OFFSET} — Make a copy of the current tool offset data.
9) RADIUS TABLE
10) WHEEL GEOMETRY {WHEEL GEOMET} — Display and alter the wheel geometry, radius and orientation values.
11) ACTIVE OFFSET {ACTIVE OFFSET} — Change the currently active offset number without requiring the programming of a
different offset number.
12) BACKUP OFFSET {BACKUP OFFSET} — Make a copy of the current wheel offset data.
13) QUICK CHECK
™ {QUICK CHECK} — Use the syntax and format checker or the {QUICK CHECK} with graphics function.
14) SYSTEM SUPORT • {PRGRAM PARAM} — Display and change the tables for programmable zones 1 and 2, the single digit
feedrates, and the fixed cycle operating parameters.
• {AMP} — Change any of the online AMP features.
• {DEVICE SETUP} — Display and change any of the communication parameters for the peripheral
devices.
• {MONI-TOR} — Display the current I/O configurations and the axis monitor for following error, distance
to marker, etc.