Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set User Manual
Page 233
Advertising
Displays and Graphics
Chapter 8
8-13
{DTG} (Large Display)
The distance from current position to the command end point of the
commanded axis move in large characters.
Figure 8.11
Results After Pressing {DTG} (Large Display) Softkey
PRGRAM A B S
TARGET
D T G AXIS
SELECT
DISTANCE TO GO[ MM
]
(ACTIVE PROGRAM NAME)
X
0.021
Z
0.000
U
0.000
F
0.000 MMPM S
00
E-STOP
Advertising