Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set - Manual (Page 346)

Coordinate Control
Chapter 11
11-30
Activating the External Part Rotation Feature
To activate the external part rotation feature, follow these steps:
1. Place the control in E-STOP and press the {OFFSET} softkey.
(softkey level 1)
PRGRAM
MANAGE
OFFSET MACRO
PARAM
PRGRAM
CHECK
SYSTEM
SUPORT
FRONT
PANEL
ERROR
MESAGE
PASS-
WORD
SWITCH
LANG
2. Press the {COORD ROTATE} softkey.
WORK
CO-ORD
COORD
ROTATE
TOOL
WEAR
TOOL
GEOMET
TOOL
MANAGE
RANDOM
TOOL
BACKUP
OFFSET
SCALNG
(softkey level 2)
The external part rotation parameters screen appears:
ENTER VALUE: E-STOP
MODE = [ MM ]
EXTERNAL PART ROTATION [ OFF ]
PLANE X Z
CENTER -2.440 -2.600
VECTOR 0.000 0.000
ANGLE 15.000
PROGRAMMABLE PART ROTATION
ANGLE 0.000
EXTERN
ON/OFF