Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set - Manual (Page 260)

Displays and Graphics
Chapter 8
8-40
2. Press the [SCREEN SAVER ] softkey.
PRGRAM
PARAM
PTOM
SI/OEM
AMP DEVICE
SETUP
MONI-
TOR
TIME
PARTS
SYSTEM
TIMING
(softkey level 2)
SCREEN
SAVER
The screen saver setup screen appears.
SCREEN SAVER
ACTIVATION TIMER : 05 MINUTES
SAVER
ON/OFF INCR
TIMER DECR
TIMER
Press This Softkey To:
SAVER ON/OFF toggle between enabling and disabling the screen saver. When the
softkey name is shown in reverse video, the screen saver is enabled.
Note the system installers PAL program can override this softkey setting.
INCR TIMER increase the duration of the Activation Timer by five minute increments.
The activation timer can be set to a maximum of 60 minutes.
DECR TIMER decrease the duration of the Activation Timer by five minute increments.
The activation timer can be set to a maximum of 60 minutes.
The activation timer determines the length of time that takes place after the
last keyboard or softkey stroke occurred before the screen saver starts.
Softkey settings that activate the screen saver and determine the activation
timer duration remain active even after power is cycled.
END OF CHAPTER