Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set - Manual (Page 373)

Chapter
12
12-1
Axis Motion
This chapter covers the group of G--codes that generate axis motion or
dwell data blocks. The major topics covered include:
Topic: On page:
Positioning Axes 12-1
QuickPath Plus 12-11
Chamfering and Corner Radius 12-22
Automatic Motion To and From Machine Home 12-27
Spindle Speed Control 12-34
Part or Wheel Spindle Orientation (M19) 12-51
Feedrates 12-53
Special AMP Assigned Feedrates 12-61
Automatic Acceleration/Deceleration 12-63
Dwell (G04) 12-78
Mirror Image (G50.1, G51.1) 12-79
Axis Clamp 12-82
Dual Axis Operation 12-82
This section covers the following topics:
Topic: On page:
Rapid Positioning Mode (G00) 12-2
Linear Interpolation Mode (G01) 12-3
Circular Interpolation Mode (G02, G03) 12-5
Positioning Rotary Axes 12-9
PAL Axis Mover 12-11
Use the 4 basic G--codes to produce axis motion:
G-code: Function:
G00 Rapid Positioning
G01 Linear interpolation
G02 Circular interpolation (clockwise)
G03 Circular interpolation (counter-clockwise)
12.0
Chapter Overview
12.1
Positioning Axes