Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set - Manual (Page 232)

Displays and Graphics
Chapter 8
8-12
{DTG}
The distance from the current position to the command end point, of the
commanded axis in normal size characters.
Figure 8.10
Results After Pressing {DTG} Softkey
E-STOP
DISTANCE TO GO[ MM ] F 0.000 MMPM
X 0.021 S 00
Z 0.000 T 0
U 0.000 (ACTIVE PROGRAM NAME)
MEMORY MAN STOP
PRGRAM A B S TARGET D T G AXIS
SELECT