Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set - Manual (Page 489)

Chapter
15
15-1
Dresser/Wheel Radius Compensation
This chapter contains this information:
Topic: On page:
Introduction to Dresser/Wheel Radius Compensation 15-2
Programming Compensation (G40, G41, G42) 15-5
Application Schemes 15-5
Compensation Block Format 15-12
Generated Compensation Blocks G39, G39.1 15-15
Type A Compensation Paths 15-17
Type A Compensation Entry Moves 15-17
Type A Compensation Exit Moves 15-20
Type B Compensation Paths 15-27
Type B Compensation Entry Moves 15-27
Type B Compensation Exit Moves 15-30
Path During Compensation 15-37
Special Compensation Cases 15-42
Changing Compensation Direction 15-42
Too Many Non-motion Blocks 15-46
Corner Movement After Generated Blocks 15-49
Changing Dresser/Wheel Radius During Compensation 15-51
MDI or Manual Motion During Compensation 15-55
Moving To/From Machine Home 15-57
Changing or Offsetting Work Coordinate System in Compensation 15-58
Block Look-Ahead 15-59
Error Detection 15-60
15.0
Chapter Overview