Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set - Manual (Page 36)

Chapter 2
Operating the Control
2-16
To perform one of these options:
1. Press the {PRGRAM EXEC} softkey.
(softkey level 2)
JOG
AXIS
PRGRAM
EXEC
You see the program execute screen:
BLOCK
RETRCE
JOG
RETRCT
CYCLE
START
CYCLE
STOP
E-STOP
PROGRAM [ MM ] F 0.000 MMPM
R X 0.000 S 0.0
Z 0.000 T 0
FILENAME
SUB NAME
MEMORY MAN STOP