Yaskawa Sigma-5 User Manual: Design and Maintenance - Rotary Motors - Manual (Page 315)

10 Appendix
10.1.2 Parameters
10-18
Pn510
Output Signal Selection 3 0000 to 0033 − 0000 After restart Setup −
(cont’d)
Parameter
No.
Name
Setting
Range
Units
Factory
Setting When Enabled Classification
Refer-
ence
Section
4th
digit 3rd
digit 2nd
digit 1st
digit
n.
Near Signal Mapping (/NEAR)
0
1
2
3
Reserved (Do not change.)
Disabled (the above signal is not used.)
Outputs the signal from CN1-1, -2 terminal.
Outputs the signal from CN1-23, -24 terminal.
Outputs the signal from CN1-25, -26 terminal.
Reserved (Do not change.)
Reserved (Do not change.)