Metrohm tiamo 2.3 Patch 1 - Manual (Page 1106)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1090 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1
The calibration can be carried out with both manual and automatic solu-
tion changes with the aid of a Sample Processor.
Commands
The following commands can be selected for calibration:
￭ CAL Cond
Measurement of conductivity standards for the determination of the
cell constant of conductivity measurement cells.
￭ CAL Spec
Measuring command for wavelength calibration.
￭ CAL LOOP Conc
Calibration loop for the calibration of ion-selective electrodes (ISE elec-
trodes).