Metrohm tiamo 2.3 Patch 1 - Manual (Page 409)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Database
tiamo 2.3 Patch 1 ￭￭￭￭￭￭￭￭ 393
For SET, STAT, DOS and KFT commands
Selection
Time [s] | Measured value | Volume [mL] | dV/
dt [µL/min] | Temperature [°C] | Calculated
1...3 | External 1...3 | off
Default value off
For KFC commands
Selection
Time [s] | Measured value | Charge [mAs] |
Amount [µg] | Drift [µg/min] | Ugen | Igen [mA]
| Calculated 1...3 | External 1...3 | off
Default value off
For BRC commands
Selection
Time [s] | Measured value | Amount [mAs] |
Water [µg] | Drift [µg/min] | Ugen | Igen [mA] |
Calculated 1...3 | External 1...3 | off
Default value off
For TET commands
Selection
Volume [mL] | Measured value [°C] | dT/dV [°C/
mL] | ERC | Time [s] | Calculated 1...3 | External
1...3 | off
Default value off
For MEAS commands
Selection
Time [s] | Measured value | dMW/dt | Temper-
ature [°C] | Calculated 1...3 | External 1...3 | off
Default value off
For MEAS T/Flow commands
Selection
Time [s] | Measured value | Flow [mL/min] |
Calculated 1...3 | External 1...3 | off
Default value off
For MEAS TC Cond commands
Selection
Temperature [°C] | Measured value | Time [s] |
dMW/dt | Calculated 1...3 | External 1...3 | off
Default value off
For MEAS Ref commands
Selection
Wavelength [nm] | Intensity [Counts] | Inten-
sity Dark [Counts] | Transmission [%] | Satura-
ted pixels | off
Default value off