Metrohm tiamo 2.3 Patch 1 - Manual (Page 1397)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.3 Patch 1 ￭￭￭￭￭￭￭￭ 1381
Range 0.01 ... 150.00 mL/min
Selection maximum
Default value maximum
Maximum dosing/filling rate for the exchange unit, depending on
the cylinder volume:
Cylinder volume maximum rate
1 mL 3.0 mL/min
5 mL 15.0 mL/min
10 mL 30.0 mL/min
20 mL 60.0 mL/min
50 mL 150.0 mL/min
Note
Enter lower rates for high-viscosity liquids.
Tubing parameters
Definition of the length and diameter of the tubing connected to the
exchange unit.
Note
Default values have already been entered for the tubing parameters;
these correspond to the dimensions of the standard tubing supplied. If
you do not make any modifications to the tubing connections then you
do not need to modify the tubing parameters. For information on
length and diameter of other tubing see Products/Accessories and
columns under
http://products.metrohm.com .
Dosing tip
Length
Length of the tubing connecting the cock to the dosing tip.
Range 0.0 ... 999.9 cm
Default value 40.0 cm
Diameter
Diameter of the tubing connecting the cock to the dosing tip.