Metrohm tiamo 2.3 Patch 1 - Manual (Page 1108)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1092 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1
* Definition of the number of calibration solutions and the type of solution
exchange.
The request for changing the buffer or the standard must be activated in
the command CAL LOOP pH or CAL LOOP Conc, respectively. During
the method run, a request for specifying the next the buffer or standard is
displayed after each measurement.
5.6.5.3 Calibrating with automatic solution exchange
Program part: Method ▶ Calibration commands
The basic structure of a calibration method with automatic solution
exchange on a Sample Processor looks as follows: