Metrohm tiamo 2.3 Patch 1 - Manual (Page 340)

4.5 Determination overview ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
324 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1
4.5.2.6.4.3 Modifications - Method
Tabs: Database ▶ Determination overview ▶ Determinations ▶ Reproc-
ess... ▶ Reprocessing ▶ Modifications ▶ Method
On the tab Method the method used in the selected determination and
its tracks and commands is displayed. A precondition is that the method is
identical for all the selected determinations. The method structure can be
modified as required for the recalculation, i.e. all the functions of the
Method editor are available.
Method name:
Shows the method name.
Version:
Shows the version of the method. For original methods the additional text
(original) appears after the version number. As soon as the method has
been modified the additional text (modified) appears after the version
number. This information is saved in the determination data when saving
the recalculated determination.
Saved:
Shows the date and time when the method version was saved.
[Save as]
Saves the modified method under the same name or under a new name.
If the modified method is saved under the name of an existing method
then all the earlier method versions will be deleted and a new version with
the number 1 will be generated.
[Modify method]
Open the dialog window Method editor. Here it is possible to modify
parameters from existing commands as well as to insert and delete tracks
and commands; however, the modified method cannot be directly saved
there. If the dialog window is closed with [OK], the method will be
checked (see Chapter 5.2.5, page 414). The modified method then
appears on the tab Methods with the addition (modified). This modified
method is then applied to the selected determinations with [Recalculate]
and can be saved at any time with [Save as].
4.5.2.6.4.4 Modifications - Statistics
Tab: Database ▶ Determination overview ▶ Determinations ▶ Reproc-
ess... ▶ Reprocessing ▶ Modifications ▶ Statistics
On the tab Statistics the single results for the statistics calculation can
subsequently be switched on and off.