Metrohm tiamo 2.3 Patch 1 - Manual (Page 706)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
690 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1
Window
A range (window) can be defined on the measured value axis, on the vol-
ume axis or on the time axis. The break point evaluation will only be car-
ried out in the defined window. Only the first break point in the defined
window will be recognized.
Selection Measured value | Volume | Time | off
Default value off
Lower limit
Value for the lower limit of the window.
Window = Measured value
Range
-2000.0 ... 2000.0 mS/cm
Default value -2000.0 mS/cm
Window = Volume
Range
0.00000 ... 9999.99 mL
Default value 0.00000 mL
Window = Time
Range
0 ... 999999 s
Default value 0 s
Upper limit
Value for the upper limit of the window.
Window = Measured value
Range
-2000.0 ... 2000.0 mS/cm
Default value 2000 mS/cm
Window = Volume
Range
0.00000 ... 9999.99 mL
Default value 9999.99 mL
Window = Time
Range
0 ... 999999 s
Default value 999999 s
5.6.3.3.6.8 MET Cond - Additional measured values
Tab: Method ▶ MET Cond ▶ Properties… ▶ Additional measured values
Command name
Name of the command.
Input 25 characters