4 measure - sample spectrum, 5 manual control - graphical display, Manual control - graphical display 8 – Metrohm tiamo 2.3 Patch 1 User Manual
Page 1624
8.5 Manual control - Graphical display
■■■■■■■■■■■■■■■■■■■■■■
1608
■■■■■■■■
tiamo 2.3 Patch 1
Range
0 ... 100 Pixels
Default value
0 Pixels
[Start]
Start measurement of the intensity.
[Stop]
Stop measurement of the intensity.
8.4.5.4
Measure - Sample spectrum
Program part: Manual control
Here a sample spectrum can be measured and displayed.
Note
Before a sample spectrum can be measured, a reference spectrum has
to be recorded in a determination by a spectrometer.
The parameters Start wavelength, End wavelength, Integration
time, Averaged spectra and Smoothing are read out of the refer-
ence spectrum and displayed, they cannot be modified.
[Start]
Start measurement of the sample spectrum. Only active, if a reference
spectrum is available.
[Stop]
Stop measurement of the sample spectrum.
8.5
Manual control - Graphical display
Program part: Manual control
All running, manually triggered functions are displayed graphically in the
subwindow for the graphical display.