Metrohm tiamo 2.3 Patch 1 - Manual (Page 412)

4.8 Subwindow Curves ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
396 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1
Selection DET | MET | SET | MEAS | MEAS T/Flow | MEAS
TC Cond | MEAS Ref | MEAS TMF | MEAS Spec
| MEAS Opt | CAL Spec | KFT | KFC | BRC | STAT
| DOS | TET
Default value DET
Note
When the dialog window is opened, those Command type will be
selected per default which applies for the curve shown in the curve
window.
Autoscaling
on | off (Default value: on)
If this option is switched on then all axes in the curve window will be
scaled automatically. In this case the fields Start value and End value
cannot be edited.
Displaying the grid
Display grid
on | off (Default value: off)
If this check box is activated then a grid will be shown against the back-
ground.
Grid type
Selection of the type of grid line.
Selection Line types | dotted
Default value dotted
Grid color
Selection of the color for the grid lines.
Selection 13 colors | gray
Default value gray
Background
Background color
Selection of the color for the curve background.
Selection 13 colors | white
Default value white