9 subwindow common variables, 1 configuration - common variables, Subwindow common variables 8 – Metrohm tiamo 2.3 Patch 1 User Manual
Page 1444: Configuration - common variables 8, Common variables
6.9 Subwindow Common variables
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1428
￭￭￭￭￭￭￭￭
tiamo 2.3 Patch 1
Lower limit
Lower warning limit for the coefficient of determination.
Range
0.00000 ... 1.00000
Default value
0.98000
Upper limit
Upper warning limit for the coefficient of determination.
Range
0.00000 ... 1.00000
Default value
1.00000
Intervention limits for coefficient of determination
on | off (Default value: off)
If this option is activated, then the values for the coefficient of determi-
nation will be shown in red if the limits are exceeded.
Lower limit
Lower intervention limit for the coefficient of determination.
Range
0.00000 ... 1.00000
Default value
0.96000
Upper limit
Upper intervention limit for the coefficient of determination.
Range
0.00000 ... 1.00000
Default value
1.00000
6.9
Subwindow Common variables
6.9.1
Configuration - Common variables
Subwindow: Configuration
▶ Common Variables
Common variables subwindow
The subwindow Common variables contains the table with the config-
ured common variables. It can be shown in the program part Configura-
tion as a part of the Configuration view or (if not present on the desktop)
in a separate window with View
▶ Quick access. The subwindow can
be enlarged and reduced as required; it can also be maximized.
Using common variables
Common variables are method-embracing variables that are stored per cli-
ent and can be used in formulas under the designation 'CV.Name'. They
are either entered manually in the configuration or assigned in the
method run by a CALC command.