Metrohm tiamo 2.3 Patch 1 - Manual (Page 1366)

6.4 Audit Trail ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1350 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1
6.4.1.7 Audit Trail - Functions
Program window: Configuration ▶ Tools ▶ Audit Trail... ▶ Audit Trail
In the Audit Trail program window the following functions can be car-
ried out:
￭ Filter Audit Trail
￭ Update Audit Trail
￭ Export Audit Trail
￭ Archive Audit Trail
￭ Delete Audit Trail
￭ Print Audit Trail
6.4.2 Audit Trail table
6.4.2.1 Audit-Trail - Table
Program window: Configuration ▶ Tools ▶ Audit Trail... ▶ Audit Trail
Open
The Audit-Trail table is opened with Tools
▶ Audit Trail... or with the
symbol in the Configuration program part.
Note
The table can be opened only if the option Enable Audit Trail is
switched on in the security settings (see Chapter 6.2.2.4, page 1312).
Contents
In the Audit Trail table, the following information regarding user actions is
displayed in the default settings:
Type
Symbol for characterizing the action:
Information about the action, which is neither relevant to the security nor
has modified any data.
Information about the action, which is either relevant to the security or
has modified any data.
Information about errors or incorrect actions. These actions are addition-
ally shown with a red background to their line numbers.