Metrohm tiamo 2.3 Patch 1 - Manual (Page 1282)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1266 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1
5.6.9.6 TRANSFER
5.6.9.6.1 TRANSFER - Overview
Dialog window: Method ▶ TRANSFER ▶ Properties... ▶ TRANSFER - 'Command
name'
Command for data transfer via RS-232 to external devices.
Appearance
The command has the following appearance:
Parameters
The parameters for the command TRANSFER are configured in the fol-
lowing dialog window:
￭ TRANSFER - Properties
Command variables
The following command variables are generated in the method run by the
command TRANSFER and can be used in formulas under the designation
'Command name.Variable designation':
Identifi-
cation Description
.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command has
not ever been started
.FIN Command status; 1 = Command has been ended at
least once, 0, invalid (variable not available) = Com-
mand has never been ended
.TOU Timeout status: 1 = Max. waiting time expired; 0 =
Max. waiting time not expired
5.6.9.6.2 TRANSFER - Properties
Dialog window: Method ▶ TRANSFER ▶ Properties... ▶ TRANSFER - 'Command
name'
Command name
Name of the command.
Input 25 characters