Metrohm tiamo 2.3 Patch 1 - Manual (Page 921)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.3 Patch 1 ￭￭￭￭￭￭￭￭ 905
Lower hysteresis
Lower hysteresis of the measured value. If the measured value exceeds the
lower limit by this hysteresis value, then the event Measured value
lower limit ok is triggered.
Titrando, 855
Range
0.0 ... 2000.0 mV
Default value 0.2 mV
Upper limit
Upper limit of the measured value. If the measured value exceeds this
limit, then the event Measured value upper limit exceeded is trig-
gered.
Titrando, 855
Range
-2000.0 ... 2000.0 mV
Default value 2000.0 mV
Titrino
Range
-2000 ... 2000
Default value 2000
Upper hysteresis
The upper hysteresis of the measured value. If the measured value once
again falls below the upper limit by this hysteresis value, then the event
Measured value upper limit ok will be triggered.
Titrando, 855
Range
0.0 ... 2000.0 mV
Default value 0.2 mV
Action
Selection of the event to be triggered if the upper or lower limit is excee-
ded:
Selection Cancel determination | Cancel command
(Titrando, 855) | Wait for [Continue] | Wait for
limit ok | none
Default value none
Cancel determination
The running STAT command will be canceled, then the exit track (if
present) will be started and the determination will be finished.
Cancel command (Titrando, 855)
The running STAT command will be canceled, then the next com-
mand will be carried out.