Grass Valley iTX Desktop v.2.6 - Manual (Page 115)

The Event Editor
• You enter a start time of 01:20 for an event with a Fixed time mode. Since this falls within
the hour that is repeated in local time (but not UTC), it is not clear whether the start time is
inside or outside the DST boundary.
iTX displays the Time Zone Needs Resolving dialog:
Clicking Inside DST sets the event with a Local Start Time of 01:20 (DST) and a Start Time of
00:20 (UTC):
Clicking Outside DST sets the event with a Local Start Time of 01:20 (non-DST) and a Start
Time of 01:20 (UTC):
Enter an event start time that could be before or after the end of DST
In this procedure, you specify the start time of an event that has a Fixed time mode.
1.
Select an event in the Schedule Grid.
The Event Editor displays the event details.
2. Enter a start time in the Preset Time box. More details , page 197.
iTX displays the Time Zone Needs Resolving dialog.
3. Do one of the following to set the start time of the event.
• Click Inside DST to specify a Local Start Time before the end of DST.
• Click Outside DST to specify a Local Start Time after the end of DST.
4. Click Store Changes.
March 2015 iTX Desktop: Operator Manual 95