Adjust the transparency of a logo, Assign a logo to a layer, More details – Grass Valley iTX Desktop v.2.6 User Manual
Page 345: E 325
Working with the Logo Editor
When you close PinPoint, the name of the selected file appears in the Audio box.
Note: You may cancel your selection of a sound effect by clicking C, to the right of the
Audio box.
6.
Click OK to close the Logo Options dialog.
Adjust the transparency of a logo
A logo has a transparency property, called its key level, which controls how much of the
underlying video image shows through the logo. You can adjust this in the Logo Options dialog:
1.
Select a logo in the Logo Editor.
2.
Click Options to display the Logo Options dialog.
3.
Move the Key slider down or up to make the logo more or less transparent.
Click OK to close the Logo Options dialog.
Assign a logo to a layer
iTX can stack logos on up to ten layers, numbered 1 to 10. By assigning a logo to a higher-
numbered layer, you may ensure a logo is not obscured by any other overlapping logo.
1.
Select a logo in the Logo Editor.
2.
Click Options to display the Logo Options dialog.
3.
Enter a layer number in the Layer box.
4.
Click OK to close the Logo Options dialog.
March 2015
iTX Desktop: Operator Manual
325