Epiphan Pearl Mini Live Video Production System with 512GB SSD (NA/JP) - Manual (Page 110)

Pearl Mini User Guide Change the HTTP/HTTPS port values
Change the HTTP/HTTPS port values
On the Pearl device, the default HTTP port is 80 and the default HTTPS port is 443. If the default ports used by
your Pearl device are not available on your network, you can change them using the Admin panel. Consult your
system administrator for the correct port values to use for HTTP and HTTPS traffic.
Ensure that the port value you choose is unique and is not currently assigned on the Pearl device,
see
Network ports used by Pearl Mini .
Change the HTTP/HTTPS port values using the Admin panel
1. Login to the Admin panel as admin, see Connect to the Admin panel .
2. From the Configuration menu, select Security. The Security configuration page opens.
3. Under HTTPS configuration, change the default HTTP and HTTPS port numbers. Click Apply when you're
done.
Secure connection (HTTPS) must be checked before you can change the HTTPS port.
4. Reboot the Pearl device when prompted. After the system has finished rebooting, log back in to the Admin
panel as admin and verify that all changes were applied.
Perform network diagnostics
Network diagnostic tools are available to help you troubleshoot your setup. Easily run diagnostics like traceroute,
ping, and others from the touch screen on Pearl Mini or Pearl-2, or using the Admin panel. For quick
troubleshooting, you can run the Connectivity status diagnostics using the front screen menu of the Pearl Nano.
You can also run network diagnostics from Epiphan Edge, see the online
Epiphan Edge User Guide .
99