Epiphan Pearl Mini Live Video Production System with 512GB SSD (NA/JP) User Manual
Page 270
Pearl Mini User Guide
Set up an SRT stream using rendezvous mode
Typically, no intervention is needed from your IT administrator to traverse a firewall in rendezvous mode.
However, you can switch to SRT caller and listener modes if you experience difficulties streaming through a
firewall in rendezvous mode, see
Set up an SRT stream using caller and listener modes
.
To establish the SRT connection between the source and destination devices in rendezvous mode, both devices
must be configured and ready to establish the connection between them. Each must know the IP address of the
other device and both must be configured to use the same port for the SRT stream.
In the following example, a Pearl Mini is set up as SRT Source A (192.168.1.10) with port 20000 and another
Pearl Mini is set up as SRT Destination B (203.0.113.10) with port 20000.
259