Epiphan Pearl Mini Live Video Production System with 512GB SSD (NA/JP) - Manual (Page 262)

Pearl Mini User Guide Disable and enable direct channel streaming
3. Set the HTTP Streaming port to specify the port used to stream the HTTP broadcast. This value along
with the URL is used by viewers to access the FLV and MPEG-TS streams.
The port number must be higher than 500 for HTTP. In the case of RTSP streaming this value
is ignored.
4. Set the RTSP Streaming port to specify which port to use when you are streaming live video via RTSP.
This value along with the URL is used by viewers to access the broadcast. The default for channel one is
554.
5. Click Apply.
Disable and enable direct channel streaming
The channel streaming URLs are enabled by default. The URLs are listed on the Status page for the channel,
which you can share with viewers. You can disable the channel's streaming URLs from the Streaming
configuration page using the Admin panel. When you create a channel, the channel's streaming URLs are
enabled by default.
251