Epiphan Pearl Mini Live Video Production System with 512GB SSD (NA/JP) - Manual (Page 441)

Pearl Mini User Guide Use a specific EDID for the video input port
EDID changes remain in effect for the HDMI input port until you replace the EDID with another one or specifically
choose to restore the factory EDID for that specific HDMI input port. A system-level factory reset does not
remove a manually assigned EDID from the HDMI port.
To get a new EDID, contact Epiphan Support . When you have the new EDID, you can upload that using the
Admin panel.
This feature is not available using the local console on the Pearl Nano.
Upload a new EDID file using the Admin panel
1. Connect to the Admin panel and log in as admin. See Connect to the Admin panel
2. From the Inputs menu, select the input port for which you want to upload the EDID.
3. On the configuration page for that source, scroll to the EDID upload section and click Choose FIle.
4. Browse to the location where the custom EDID file was saved and select it, then click open.
5. Select upload. When the upload is complete, the page updates to reflect success or failure.
Restore factory default EDID
When you no longer want a custom EDID assigned to an input port, you can restore the input port to use the
factory default EDID. Currently there is no way to tell if your input port is using a custom EDID. If you are unsure,
restoring to factory default is the best approach.
Restore the default EDID using the Admin panel
1. Log in to the Admin panel as admin, see Connect to the Admin panel .
430