Epiphan Pearl Mini Live Video Production System with 512GB SSD (NA/JP) - Manual (Page 358)

Pearl Mini User Guide Disable CMS and disconnect from Panopto
What's next?
For Panopto, proceed to create URL redirects for Pearl Mini, setup authentication for ad hoc events, and select
default settings. See
Panopto recording and webcasting setup .
An API client ID with two URL redirects are required to enable authentication on Pearl Mini, see Set
up Panopto authentication for ad hoc events
Disable CMS and disconnect from Panopto
When you use the Admin panel to disable CMS on Pearl Mini, the remote recorder disconnects from Panopto. As
long as Pearl Mini is still registered, you can create new scheduled sessions in Panopto for this remote recorder,
but the events schedule won't synchronize until CMS is re-enabled.
If CMS is re-enabled on Pearl Mini before a VOD session is scheduled to end, recording starts automatically on
Pearl Mini when the connection to Panopto is re-established. However, when the start of a scheduled webcasting
event is missed, the stream does not automatically start when the connection is re-established. A new
webcasting event should be created.
Revoking the registration key and deleting Pearl Mini as a remote recorder is performed in Panopto, see
Panopto's documentation for instructions. If you delete Pearl Mini in Panopto, all scheduled and recurring events
that were associated with Pearl Mini are permanently deleted.
Content Management Systems (CMSs) can change channel settings automatically. After disabling
CMS on Pearl Mini, it's good practice to check your channel settings or apply a configuration preset
to restore your channel to known values.
Important considerations
l You cannot start unscheduled ad hoc events when CMS is disabled on Pearl Mini.
l Sessions that are scheduled to start while CMS is disabled on Pearl Mini do not start on Pearl Mini.
l Scheduled webcasting events do not start if Pearl Mini's connection to Panopto is not available.
l Deleting Pearl Mini in Panopto permanently deletes future scheduled and recurring sessions associated
with that remote recorder.
l Do not disable CMS while an event is in progress.
Disconnect Pearl Mini from Panopto using the Admin panel
1. Login to the Admin panel as admin, see Connect to the Admin panel .
2. From the Configuration menu, click CMS. The Content management system configuration menu opens.
3. To disconnect Pearl Mini, select none from the Choose CMS drop down and then click Apply.
347