Epiphan Pearl Mini Live Video Production System with 512GB SSD (NA/JP) - Manual (Page 381)

Pearl Mini User Guide Extend or pause CMS recordings and webcasts
l The primary and secondary video sources you select in Panopto correspond to individual channels
configured on the Pearl device. Panopto users select the resolution for each video source in Panopto
when a new scheduled or recurring session is created. The encoding settings are applied automatically to
the channels on the Pearl device.
l After the event ends, recordings automatically upload to the CMS. It may take a while for content to show
up in Kaltura's media lists, depending on how busy the Kaltura CMS system is at that time. Recordings are
associated with the user account that scheduled the event.
l If network connectivity is lost during a scheduled VOD event, the Pearl device continues to record the
event locally. When network connectivity re-establishes and the event ends, the recording uploads to the
CMS as expected.
l See your Pearl administrator if you need to add or remove channels on the Pearl device. For information
about Pearl device administration and control using the Admin panel, see
Integration .
For Panopto VOD events, if you manually stop a scheduled VOD event before the scheduled
end time when the Pearl device doesn't have network connectivity, the Pearl device uploads
the completed event's recording when network connectivity resumes. However, Panopto
does not recognize that the event has ended. The event remains in the In Progress state in
Panopto and you must wait until the original event's scheduled end time before creating a
new event using that Pearl device.
Extend or pause CMS recordings and webcasts
You can extend an active scheduled or ad hoc event using the Pearl device's front screen or the Admin panel.
The extend event button can be configured to add 5, 10, or 15 minutes to the event each time it is selected, or 6,
10, or 15 in the case of YuJa. See
Set the extend Kaltura CMS event interval , Set the extend Panopto CMS event
interval , or Set the extend YuJa CMS event interval , depending on the integrated CMS.
The option to extend the event appears on the Events screen while the event is in progress. Events cannot be
extended beyond the start of the next scheduled event.
On the Pearl-2 and Pearl Mini, tap the button to add the specified amount of time to the current event.
For Panopto and YuJa events, you can also pause active recordings and webcasts from the Pearl device screen
or using the Admin panel. An extra pause button appears on the Events screen. For Panopto you can also set up
370