Epiphan Pearl Mini Live Video Production System with 512GB SSD (NA/JP) - Manual (Page 24)

Pearl Mini User Guide Monitoring audio
Increasing the volume to 100% may cause you to hear distortion that is not actually present in the
audio signal being recorded and streamed.
Adjust the volume on Pearl-2 or Pearl Mini
Tap the headphones icon on the touch screen to adjust the volume. Each tap increases the volume by 25% to a
maximum volume of 100%. Tapping the headphones icon when the volume is at 100% mutes the volume. You
can also long press the headphones icon to mute and unmute the volume.
At 75% volume, what you hear corresponds to the nominal audio level in the VU meter at approximately where
the green bars change to yellow.
Volume is muted.
25%
volume.
50%
volume.
75%
volume.
100%
volume.
Audio VU meter
A VU meter on the device screen shows the audio levels for the channel you are monitoring. The value is
displayed in dBFS (decibels relative to full scale). Colored bars represent the audio level.
Channels that have stereo audio display two bars. The top bar is the left audio channel and the bottom bar is the
right audio channel.
BETA DRAFT - 13