Epiphan Pearl Mini Live Video Production System with 512GB SSD (NA/JP) - Manual (Page 286)

Pearl Mini User Guide MPEG-TS streams using RTP/UDP push
If you're streaming to 10/100 Mbps set-top boxes over Gigabit Ethernet and you notice frames are dropping, you
can limit the bandwidth of the stream, see
Set up traffic shaping .
Configure a channel for MPEG-TS using RTP/UDP push and enable SAP
1. Login to the Admin panel as admin, see Connect to the Admin panel .
2. From the Channels menu, select the channel and click Streaming. The Streaming configuration page
opens.
3. Click New stream and select MPEG-TS RTP/UDP push.
4. Enter the destination multicast IP address where the broadcast can be viewed.
A IPv4 multicast address range is an address between 224.0.0.0 to 239.255.255.255.
Contact your System Administrator for the specific address to use.
275