Epiphan Pearl Mini Live Video Production System with 512GB SSD (NA/JP) - Manual (Page 273)

Pearl Mini User Guide Set up an SRT stream using caller and listener modes
Refresh your browser if the new stream name doesn't immediately display.
12. Click Apply.
13. When your ready to start streaming, click Start
What's next?
If you also need to set up Pearl Mini as an SRT destination and ingest an SRT stream from a remote source, you
must add the SRT stream as a input, see
Connect an SRT stream as an input .
Set up an SRT stream using caller and listener modes
When setting up SRT streaming on Pearl Mini, you can configure Pearl Mini as an SRT source encoder and send
an SRT stream over the Internet to other SRT destinations (decoders) such as a CDN or another Pearl Mini.
Caller and listener modes work together to establish the SRT link between your SRT source and destination
device when traversing the firewall is difficult and Rendezvous mode didn't work.
To establish an SRT link between the source and destination devices, ensure that one device is a Listener and
the other is a caller. The device you set as the caller (or listener) is arbitrary. If the destination device is set as the
listener and is ingesting multiple SRT sources, then all your SRT source devices must be set as callers.
In the following example, Pearl Mini is set up as SRT Source A (192.168.1.10) and another Pearl Mini is setup as
SRT Destination B (203.0.113.10). Source A is streaming through a firewall/NAT to Destination B, which ingests
the SRT stream as a video input with embedded audio.
262