ChamSys MagicQ User Manual - Manual (Page 112)

MagicQ User Manual 83 / 355
Chapter 11
FX Engine
11.1 Adding in FX
To apply a FX to some heads, select the heads then from the FX Window, Group Window, or Prog Window press the ADD FX
soft button.
MagicQ groups FX into the categories - Intensity, Position, Colour, Beam, Any Attribute, User and Old. MagicQ lists all of the
stored “Waveform FX”. Choose the Category and then the FX to apply.
The position category includes FX usingthe pan and tilt attributes:
The colour category includes FX using the CMY/RGB attributes: