Colour fade, Beam fade, Htp in delay – ChamSys MagicQ User Manual User Manual
Page 171: Htp out delay, Position delay, Colour delay, Beam delay, Fx (view defaults only), Default in fade, Default out fade
MagicQ User Manual
142 / 355
17.11.2
Colour fade
The default fade times used when new Cues are recorded in a Cue Stack. Used by Cues in the Cue Stack set to “Cue Timing”.
Once Cues have been recorded then the times for Specific Cues are edited in the Cue Window, View Times.
17.11.3
Beam fade
The default fade times used when new Cues are recorded in a Cue Stack. Used by Cues in the Cue Stack set to “Cue Timing”.
Once Cues have been recorded then the times for Specific Cues are edited in the Cue Window, View Times.
17.11.4
HTP in delay
The default delay times used when new Cues are recorded in a Cue Stack. Used by Cues in the Cue Stack set to “Cue Timing”.
Once Cues have been recorded then the times for Specific Cues are edited in the Cue Window, View Times.
17.11.5
HTP out delay
The default delay times used when new Cues are recorded in a Cue Stack. Used by Cues in the Cue Stack set to “Cue Timing”.
Once Cues have been recorded then the times for Specific Cues are edited in the Cue Window, View Times.
17.11.6
Position delay
The default delay times used when new Cues are recorded in a Cue Stack. Used by Cues in the Cue Stack set to “Cue Timing”.
Once Cues have been recorded then the times for Specific Cues are edited in the Cue Window, View Times.
17.11.7
Colour delay
The default delay times used when new Cues are recorded in a Cue Stack. Used by Cues in the Cue Stack set to “Cue Timing”.
Once Cues have been recorded then the times for Specific Cues are edited in the Cue Window, View Times.
17.11.8
Beam delay
The default delay times used when new Cues are recorded in a Cue Stack. Used by Cues in the Cue Stack set to “Cue Timing”.
Once Cues have been recorded then the times for Specific Cues are edited in the Cue Window, View Times.
17.12
FX (View Defaults Only)
Default speed
This is the default FX speed used when creating new Waveform FX in the FX Editor Window.
17.12.1
Default in fade
This is the default FX fade in used when setting a specific FX fade in time. Note that by default FX are faded in using the fade
times of the Cue step.
17.12.2
Default out fade
This is the default FX fade in used when setting a specific FX fade out time. Note that by default FX are faded out using the fade
times of the Cue step.